ClearWater® Test Strips (150 Test Strips)

Clearwater® Test Strips are the quick and easy way to check chemical levels in any hot tub.

The Clearwater® Dip Tests are manufactured by the founders of dip testing in the USA and are the most accurate available on the market so you know you're getting an accurate reading every single time.

How do I use the Clearwater® Dip Test Strips in my hot tub?

‑ Carefully remove one test strip from the container making sure none of the others get wet
‑ Dip the test strip into the water for a couple of seconds, then remove it
‑ Hold the hot tub test strip level for 15 seconds and do not shake it
‑ Place the test strip against the colour scale on the container to compare levels

The hot tub test strips highlight, chlorine levels, the water's pH and Total Alkalinity levels. There are three separate sections on each strip to indicate each individual level.

Chlorine levels of a hot tub should be 3‑5 ppm (Parts Per Million), pH levels should be 7.2 ‑ 7.6 and Total Alkalinity levels should measure 80 ‑ 120 ppm (Parts Per Million).

Using the testing strips to check water balance enables you to identify what chemicals need to be added to bring them within the correct parameters. Untested water can become a breeding ground for bacteria or develop a chemical imbalance that makes eyes and irritate skin.