Back to previous page
E05
Is there an E05 error code displaying on your Lay-Z-Spa pump?
The temperature sensor may be experiencing a connection issue. A thermal rest is needed.
If your hot tub pump has a thermal reset button on the side
- Turn plug off wait 10 seconds and turn on
- On the PRCD (black box) press: Reset → Test → Reset
- Hold down the On / Off button on the pump for 3 seconds
- Press thermal reset button (Side of the pump)
- Press heater button - the pump should be working with no error codes
If your hot tub pump does not have a Thermal Reset button
- Turn off the pump and disconnect the plug
- Wait 10-20 minutes
- Reconnect to the mains and turn the plug back on
- On the PRCD (black box) press: Reset → Test → Reset
- Hold down the On / Off button on the pump for 3 seconds
- Press heater button - the pump should be working with no error codes
If the above does not solve the error code please contact our Customer Care team below.
Need to get in touch?
