Is there an E06 error code displaying on your Lay-Z-Spa pump? This means your Lay-Z-Spa pump is experiencing an electrical fault.
Step 1 ‑ Check power supply:
Your pump unit must always be plugged into a grounded mains plug socket. You must not attempt to run the unit off an extension lead or a spur. This can cause the pump to stop working. Please also check the RCD and fuses. To solve this we recommend going through the following electrical checklist:
- Where is the item plugged into?
- Is the pump plugged into a single of double socket?
- Is the pump being used with an extension lead?
- Are there any other items plugged into the same socket?
- Is the plug socket outside? If so, is the socket waterproof?
- How old is the plug socket?
- Is the plug socket connected directly into the mains or is it a spur?
- Are there any other household items tripping?
- When was the last time the socket was tested by an electrician?
Step 2 - Reset the pump
- Turn off and unplug the pump
- Wait 5 minutes
- Turn the pump back on and try again
If the following steps provided above do not resolve the issue, please contact our Customer Care team below.
