Lay-Z-Spa Rigid Wall Hot Tub E02 or E12 error code

If this error code appears on your Lay-Z-Spa Rigid Wall Hot Tub, especially when you first use it, it is likely due to trapped air.

• Turn off the power supply and open the access panel (located on the same side as the power cord).
• Firmly unscrew the pump’s suction inlet fittings (coupling) until the trapped air is bled out and water begins to flow steadily (this is "priming" the system).
• As soon as the water starts flowing, retighten the fittings.

Top tip: Fill the hot tub up via the filter holder, not directly into the hot tub.

If your E02 code does not clear after this, or you experience any other error codes, please visit Pump Error Codes.