Lay-Z-Spa Hot Tub Descaler

Name: Lay-Z-Spa Hot Tub Descaler
Brand: Lay-Z-Spa UK
SKU: BW60343
Price: 19.99 GBP
Availability: InStock

SKU: BW60343

New

£19.99

In stock

Hot tub descaler compatible with all Lay-Z-Spa pumps including AirJet™, HydroJet Pro and UltraFit™
Effectively removes limescale/calcium deposits from internal components
Improves water flow, general efficiency and prolongs the lifespan of the pump
Essential accessory for areas of the UK with medium or hard water
Effectively remove scale build-up and prevents water flow & E02 errors
Includes complete instruction manual on how to use with your Lay-Z-Spa

Quantity:

FREE Standard Shipping

On orders above £20. Usually delivered within 3-5 working days.

Lay-Z-Spa Hot Tub Descaler

£19.99

Product Details

The official Lay-Z-Spa® Descaler removes calcium deposits to improve the efficiency and prolong the lifespan of the heater pump.

Regularly descaling a Lay-Z-Spa pump will improve the flow of water and general efficiency by removing limescale/calcium deposits from the heater, circulation pump and flow sensor. Frequent descaling is highly recommended for areas of the UK with medium or hard water.

Compatible with all Lay-Z-Spa pumps, including AirJet™, HydroJet™, HydroJet Pro™ and UltraFit™, the descaling tool is designed to create a short, closed water circuit inside the pump for the circulation of specific descaling chemicals (not included).

How to use the Lay-Z-Spa® Descaler:

Disconnect the pump from the main hot tub (except UltraFit™ hot tubs).
Connect the descaler to the water in and out pipes following the instructions with the correct adaptors.
Fill up to the minimum line with your preferred descaling product. We recommend either a 50/50 mix of water and white vinegar or Approx 200ml of ClearWater Scale & Stain Controller diluted in water.
Screw on the lid to create a safe and closed water circuit.
Option 1: Set the temperature to 30-35°C and activate the heater (this will automatically run the filter cycle) and run for 30 minutes
Option 2: Do not activate filter or heat and leave the descaling solution for a minimum of 3 hours.
Unscrew the drain valve on the descaler to empty the liquid and detach the descaler.
Flush clean water through the pump for 2 minutes using a hose.

FAQs

Will the Descaler fit my Lay-Z-Spa?

Yes, our descaling tool is designed to be universal with all Lay-Z-Spa hot tubs. It includes a range of adapters to for all Lay-Z-Spa pumps. Refer to the manual to see how it connects to your Lay-Z-Spa.

Do I need to empty the water to use the descaler?

If you have a built-in UltraFit ™ pump, yes you will need to empty your water. For external pumps, you can use the stopper caps, then disconnect your pump.

How often should I use the Lay-Z-Spa descaler?

We recommend changing your water a maximum of every 3 months. This is the perfect opportunity to use your descaler while giving the rest of your Lay-Z-Spa good clean. If you are in a very hard water area, we would recommend using the descaler once a month to prevent scale build-up.

Can I use other descaling products / chemicals?

We recommend either a 50/50 mix of water and vinegar or the ClearWater Scale & Stain Remover. Other descaling products are available but we have not yet tested any long-term effects they may have on your pump and components.

Explore More

Setup & Maintenance

Health & Wellbeing

Ideas, Tips & Inspiration

Lay-Z-Spa Hot Tub Descaler

FAQs

You May Also Like

Explore More