Backwash

A

Backwash

Get support and advice for your Lay-Z-Spa pump. If you need help with the backwash process for your pump check out this helpful guide which will take your through the process step by step. This backwash process helps solve error codes which may display on your Lay-Z-Spa pump. Then if you still need assistance this guide will direct you to our Customer Care team who are here to support you with any issues and get you back to enjoying your Lay-Z-Spa in no time.

If you need to complete the backwash process, please follow these steps:

  1. Attach the stopper caps to the inside of the liner and then remove the Lay-Z-Spa pump unit from the liner (you can do this by unscrewing the 3 couplings ‘A, B and C’).
  2. Using a hosepipe, flush water backwards through the pump. Water should go through pipe ‘B’ and come out of pipe ‘C’.
  3. After a few minutes, flush the water in the opposite direction for about 2 minutes (through pipe ‘C’ and out of pipe ‘B’).

View our video which takes you through these steps here: