Bulging liner

Get support and advice for your Lay-Z-Spa liner. Check out this step-by-step troubleshooting guide we recommend. This guide will help you identify the cause and any relevant solutions. Or if you still need assistance this guide will direct you to our Customer Care team who are here to support you with any issues and get you back to enjoying your Lay-Z-Spa in no time.

When inflating your Lay-Z-Spa liner it is very important to only use a Lay-Z-Spa pump as it is designed to inflate your spa to the optimum level, accounting for changes in air temperature, then any additional air will be expelled from the area where the air hose connects to the pump to avoid over-inflation. We do not recommend using any other pumps, including hand pumps, due to risk of over-inflation.

We advise against covering the holes on the base of the inflation hose when inflating otherwise this could result in over inflation, and bulging/damage to the structure of the product.

Please note that this advice does not apply to drop stitch models (I.e. those with thinner sides/walls) as they have a different construction, requiring use of a hand pump

If your Lay-Z-Spa liner is experiencing bulging please contact the Customer Care team below for further advise and so we may assist further.

If you are no longer within your warranty period, replacement liners can be purchased here.